De Marque Oak is our engineered European Oak collection, sold in three formats. The parquetry planks use a Universal Tongue & Groove profile that allows more than one pattern to be assembled from the same board, in a contemporary palette of pre-finished colours.
Herringbone is laid in a herringbone pattern, in fifteen colours across 600 × 120 × 15/4mm and 600 × 120 × 21/6mm. Chevron is laid in a chevron pattern, in sixteen colours across 600 × 120 × 15/4mm and 600 × 90 × 21/6mm. Floorboards is the wide plank format, in nine colours across a 1900 × 220 × 15/4mm board and a 2200 × 240 × 15mm board.
Request your quote now and plan smarter:
Parquetry Installation:
We recommend a full trowel spread adhesive bonded to a homogenous, flat and dry surface such as plywood. Wooden tongue inserts are provided to aid pattern design and assembly. Parquetry is not suitable as a floating installation.
De Marque Oak Parquetry must be Direct Fix Installation only.
Profile description:
Engineered Oak, Universal Tongue & Groove (1 side tongue/3 sides groove). Micro Bevelled Edges.
Grade & Surface:
A/B/C Grade contains knots and split defects that are filled to compliment surface character.
Pre-finished Matte, European PU coating. Light wire brush.
Size & Length:
120mm width, 600 mm length, 21mm thickness. 6mm Wear Layer.
Size & Length:
120mm width, 600 mm length, 15mm thickness. 4mm Wear Layer.
Slip Resistance:
In accordance with AS/NZS 4586-2013, P3. VOC Emissions; < E1, (Below World Health Organisation Levels)
Grade ABCD, light brushed surface.
5.5 – 6.0 kN.
Below E1.
25 year limited (lifetime) structural; 20 year limited residential coating; 5 year limited commercial structural and wear.
Suitable over "In-Slab" hydronic heating only.
The De Marque 15/4mm parquetry planks combine a 4mm solid Oak wear layer engineered onto an 11mm plywood substrate for a finished thickness of 15mm. The 21/6mm planks combine a 6mm solid Oak wear layer onto a 15mm plywood substrate for a finished thickness of 21mm.
Parquetry Installation:
we recommend a full trowel spread adhesive bonded to a homogenous, flat and dry surface such as plywood. Wooden tongue inserts are provided to aid pattern design and assembly. Parquetry is not suitable as a floating installation. For concrete slabs, the slab must be dry <2.2% with full Moisture Barrier applied. The parquetry is then adhered with a matching brand elastomeric wood floor adhesive. Sika brand products are recommended.
Profile description:
Engineered Oak, Universal Tongue & Groove (1 side tongue/3 sides groove). Micro Bevelled Edges.
Grade & Surface:
A/B/C Grade contains knots and split defects that are filled to compliment surface character. Pre-finished Matte, European PU coating. Light wire brush surface texture.
Size & Length:
90mm width, 600 mm length, 21mm thickness. 6mm Wear Layer.
Slip Resistance:
In accordance with AS/NZS 4586-2013, P3. VOC Emissions; < E1, (Below World Health Organisation Levels)
Grade ABCD, light brushed surface.
5.5 – 6.0 kN.
Below E1.
25 year limited (lifetime) structural; 20 year limited residential coating; 5 year limited commercial structural and wear.
Suitable over "In-Slab" hydronic heating only.
The De Marque Chevron planks are laid in a chevron pattern. The 15/4mm planks combine a 4mm solid Oak wear layer onto an 11mm plywood substrate for a finished thickness of 15mm; the 21/6mm planks combine a 6mm solid Oak wear layer onto a 15mm plywood substrate for a finished thickness of 21mm. Raw (uncoated) is also available for custom on-site finishing.
